The Schneider Conext inverter/distribution panel bundle gives you everything you need to start setting up your own home power system: A SW2524 2000W pure sine wave inverter, and two easy-connect power distribution panels (1 AC panel, 1 DC panel). The three components of this kit are designed to connect together quickly and easily, saving you hours of time designing and engineering your own power distribution system.
The SW2524 Conext inverter provides 2000W of power, either 120V or 240V as needed. It can be used as a grid-tie inverter, helping you avoid peak electric rates by supplementing grid power with power from your renewable power system. It also works great as an off-grid inverter, allowing you to enjoy the convenience of AC power without an electric utility connection. Conext SW inverters also interface with engine generators, providing extra power when the generator loads are beyond the generator's output capacity.
The included AC and DC power distribution panels are pre-wired and labeled, to make installation and set up easy. The DC panel includes one 250A breaker, and additional breaker slots if you need to expand your system. The AC panel includes multiple pre-installed breakers, so you can easily install multiple AC power sources and electrical loads. You can easily attach a Conext MPPT Solar Control, or your choice of many other Schneider accessories.
From the manufacturer:
Conext™ SW is perfect for off-grid, backup power and self-consumption applications, it is a pure sine wave, hybrid inverter system with switchable 50/60 Hz frequencies, providing power for every need. For expanded off-grid capacity, the Conext SW is integrated with fuel-based generators as required to support loads larger than the generator’s output. It’s also self-consumption ready, able to prioritize solar consumption over the grid, while maintaining zero grid export. The Conext SW works with the grid to avoid peak utility charges and support the grid when utility supply is limited. Accessories include pre-wired universal DC distribution panel and AC distribution panels. Stacking two Conext SW units will double the system’s total output power and available solar charge controllers allow for the integration of solar capacity as required.
The Conext™ SW Power Distribution Panels are pre-wired out of the box and labeled to support the integration of Conext SW inverter/chargers with a Conext MPPT Solar Charge Controller, battery bank, and load centers. Designed to save installers significant time, effort and costs on every installation, the Distribution Panels offer excellent value when compared to customized options.
The solution set includes a DC distribution panel complete with a pre-installed 250 A DC breaker and additional breaker slots for integrating multiple DC power sources. AC distribution panels are also available for 120/240 VAC and 230 VAC requirements, pre-installed with multiple AC breakers for integrating AC power sources and loads. Each AC panel also supports the integration of fuel-based generators providing a central load center for managing an installation’s AC power needs.