Flojet's 2840 series features a high-volume water pump with an integrated accumulator tank. The compact design with sturdy mounting base allows installation horizontally or vertically, with a variety of ports for easy installation in any water system. The 1.1 gallon accumulator tank reduces pump cycling and provides smooth water flow. The self-priming pump can run dry without harm.
The 2840-100 operates on 12V DC power, and provides 4.5 gallons per minute to a full sized residential water system, enough for a washer, two baths, kitchen, ice maker, and filtered water faucet. Ideal for large RVs, boats or homes with holding tank water systems.
Pump Specifications:
- Flow Rate: 4.5 gpm
- Pressure Switch: On @ 30psi, Off @ 40psi
- Ports: Quad port (inlet), Pipe fittings (outlet)
- Pump Motor Amp Draw: 10A @ 12V
- Priming: Self-priming to 5ft.
- Dimensions: H–7.5" W–11.25" L–12.875"
- Net Weight: 8.8lb.
- Included Accessories: 1.1 gallon accumulator tank, Inlet strainer
From the manufacturer:
The Flojet 2840 Series Booster Systems are designed to provide a constant water pressure of 0 to 40 psi (0.7 to 2.7 bar) and a maximum flow rate of 4.5 gpm at 10 psi (0.7 bar). The pump is fully automatic, with built-in inlet strainer, pressure switch and check valve, and supplies smooth flow from trickle to full flow. Typical uses include applications where available water pressure is very low, and fluctuates widely. Easy installation requires only that the water lines be connected, and the power cord plugged in.
Comes wired with a 3 prong AC plug. Uses Quad snap-in port fittings on the inlet side (some included with pump). Pipe fittings for the outlet side after the accumulator tank. 1740 series inlet strainer recommended (one included with pump.) See "RELATED PRODUCTS" tab above, for service parts & compatible accessories.
